2MT Orange Peel Hydraulic Grab

2Ton Hydraulic Orange Peels Grabs

The electro-hydraulic grab is a self-contained hydraulic system such as a motor and a hydraulic pump, and is driven by an external power source to open and close the grab. The electro hydraulic grab prange peel grab relies on the positive or negative of the motor or the hydraulic reversing valve to control the opening and closing of the grab. Electro-hydraulic bulk cargo handling grab is an effective tool for loading and unloading bulk cargo such as yellow sand, coal, mineral powder, ore and cement in various harsh environments.

1T, 2T, 3T 5T Hydraulic Grab Technical Data

Slags Handling Cactus Grab Application

Electro Hydraulic Grab Maintenance

1.Lubrication instructions

Each lubrication point on the grab is marked with a blue mark, hanging the splicing bolt and the cylinder. The dumpling bolt is added with lubricant once 2-3 weeks. The claws of the grab must be added once a day. It will be better if the lubricating oil containing lithium base oil.

2.Oil filter

When the grab is used for the first time and the work time is around to 50hours, the oil filter should be cleaned one time. And then every 200 working hours, it should clean it again. In addition, when the hydraulic equipment or cylinder is put into use after repairing, the oil filter should also be cleaned. The oil filter is equipped with a magnetic filter device. Always clean the magnet pins during the cleaning process and then install them.

Hot Tags: 2mt orange peel hydraulic grab, China, factory, manufacturers, suppliers, made in China