Rail Mounted Double Girder Container Gantry Cranes are mainly used for container handling, handling and stacking of container railway transfer yards and large container storage yards.
Rail Mounted Double Girder Container Gantry Crane consists of main girder, rigid and flexible door legs, running trolley, hoisting mechanism, long traveling mechanism, electrical system, operating cabin and so on.
According to the yard operation process, the cantilever is extended in the direction of the single door leg or the direction of the double door to become a single cantilever or double cantilever type and does not extend into a non-cantilever type.
Container Gantry Crane Details
1 The lifting speed is lower and the speed of long traveling is higher. According to the demand of the container yard, the lifting height of the rail-type container gantry crane is determined by the stack of three or four or four or five piles. Since the lifting height is not high, the lifting speed is correspondingly low. However, the container yard generally has a long length along the running track. In order to achieve certain productivity, the speed of the crane long traveling is relatively high.
2 The running speed of the trolley can be determined according to the span of the bridge and the overhanging distance between the two ends. When the span and the length of the boom are small, the trolley running speed and productivity requirements are relatively small. When the span is large and the length of the cantilever is also large, the running speed of the trolley can be increased accordingly to meet the productivity requirements.
3 When the span exceeds 40m, during the high-speed operation of the crane, the offset will occur due to the different running resistance of the legs on both sides. For this purpose, a synchronizing device is set to keep the running speed of the running mechanisms on both sides synchronized by the electric control system.
Container Gantry Crane Technical Parameters
Model
Container Gantry Crane
Crane Capacity
45t
Crane Span
8m+35m+8m
Lifting Height
12m
Lifting Mechanism
Lifting speed
1~12 m/min
Motor Brand
NGP
Brake Brand
ZPMC TOP 1 China Brand
Working Class
M6
Wire rope
Structure
24NAT 6×19W+FC1770ZS336
Tensile Strength
1770MPa
Cross Traveling Mechanism
Traveling Speed
5~50 m/min
Brake Brand
ZPMC TOP 1 China Brand
Working Class
M6
Long Traveling Mechanism
Traveling Speed
0~50m/min
Brake Brand
ZPMC TOP 1 China Brand
Reducer Brand
TONGLI Brand
Rail Type
P50
Working Class
M6
Control Method
Cabin Control
Protection Level of Motor
IP55
Isolation Grade of Motor
Class H
Working temperature
-40~40℃
Power Supply
380V 50HZ 3P
SINOKO CRANE CERTIFICATES
ABOUT SINOKO CRANES
Hot Tags: 30t 40t 50t rail mounted double girder container gantry crane manufacturer, China, factory, manufacturers, suppliers, made in China