Column Mounted Jib Crane

Safety Procedures for Column Mounted Jib Crane:

1. The operator of the cantilever crane should check whether there is any fault in the switch button and wire rope limit before use. If there is any problem, it must be repaired in time before use. After use, the power switch must be turned off before leaving the arm crane. .

2. Concentrate on lifting the workpiece, put your hands on the operation switch, so as to brake at any time, do not allow to hang while chatting, eating, etc., so as to avoid danger.

3. When lifting any workpiece, be sure to try to hang it. The hook should be vertical. If the hook is unbalanced, adjust the hook in time. Do not slant the crane. Try again to keep the workpiece stable and then lift it.

4. Do not overload the lifting, lift any workpiece is not allowed to exceed 500kg, otherwise it will be severely punished according to the violation of operating procedures.

5. When lifting the workpiece, it is not allowed to be too high from the ground. It should be around half a person. If there is an object, be careful not to collide. It is forbidden to lift across the machine.

6. When lifting any workpiece, pay attention to the operating condition at any time, immediately stop the crane if abnormal noise and abnormality occur, and report it in time for treatment. If the operation is sick, it will be severely punished according to the violation of the operating procedures.

7. The cantilever crane is strictly prohibited from all sudden repairs.

8. When not in use, the jib crane should be placed in a safe place, and it is not allowed to obstruct the running route of other lifting equipment, and it is not allowed to park at will, otherwise it will be punished according to the operating rules.

Hot Tags: column mounted jib crane, China, factory, manufacturers, suppliers, made in China