How to repair the European single and double beam crane?

European single and double beam crane appearance: sweep the entire appearance, so that there is no dust, no yellow robe. Check for cracks and open welds. Carts and trolleys: Inspect and tighten the drive shaft seat, gear box, coupling and shaft, and whether the keys are loose; check and adjust the brake wheel spacing to make it average, vivid and reliable. Check the European single and double beam crane reducer to see if it leaks oil. If there is abnormal noise in the box at the time of operation, the lid should be opened for inspection. Usually due to bearing damage or gear meshing side gap is too large, the tooth surface wear is tight.

Inspection of wire ropes for European single and double girder bridge cranes. Inspect the wire rope to pay attention to the situation of broken wire, wear, kinking, rust, etc. For some addresses that are more tightly damaged or broken, but have not exceeded the standard, mark it to focus on re-examination. Pay attention to whether it is useful to check the safety limiter of the wire rope in the reel, whether the wire rope pressure plate on the reel is pressed and whether the number of platens is suitable.

Smooth: Inspect all parts of the oil and oil, participate in or change the smooth oil as required.