L Type 5 ~ 50T / 10T Single Girder Gantry Crane with Hook

MHL-type electric hoist gantry crane widely used with the mechanical or steel structure assembly area, construction sites, warehouse yard, docks, and other open-air operations in the site for lifting transport handling and so on. Also suitable for work in the interior workshop.

Send Inquiry Chat Now

L Type 5 ~ 50T / 10T Single Girder Gantry Crane with Hook

I. Description

European Standard Single Girder Gantry Crane design, dimensioning and caculations are based on ISO,GB,BS and FEM standard.
Manufacturing of steel construction is based on AWS D14.1 Code for welding.
Manufacturing of hooks is based on DIN 15401,15402 and 15404.
The electric equipment of the crane follows:IEC 60204-32,VDE0113,VDE0100 and CEE standards.
Electric motors are manufactured according to IEC Recommendations 24-1,34-5 and 72-1.
All component manufacturing of KENANCRANES comply with CE certificates and ISO 9001 standards.

II. Technical Data

L type gantry crane

Capacity/t			3	5	10	16	20
Span/m			12/16/24/30
Operational method			pendent line with press button/cabin/remote
Speed	Lifting m/min		8,8/0.8	8,8/0.8	7,7/0.7	3.5	3.5
	Cross travelling		20	20	20	20	20
	Long Travelling	Ground	20	20	20	20	20
		Cable	20,30,45	20,30,40	20,30	20,30	20,30
Electric hoist			CD1/MD1	CD1/MD1	CD1/MD1	CD1	HC
Lifting height/m			6/9/12/18/24/30
Working duty			A3
Power supply			380V 50Hz 3PH A.C.

III. Product Advantages

Safety- Single Girder granty Crane

* Weight overload protection device.
* Top quality polyurethane buffer.
* Crane travelling limit switch and lifting limit switch.
* Voltage lost protection function,when power is failuire then it needs reset all function to start working.
* Emergency stop system,in case of emergency,the operatore could use emergency stop button to cut off power and stop the crane operation immediately to protect human and relevant property.
* Current overload protection function.
* Phase protection function.

IV. Application