Port crane lubrication points

Lubrication is one of the important measures to ensure the normal operation of the port crane, prolong the life of the machine, and improve the efficiency and safety.

The maintenance personnel should fully understand the importance of the lubrication of the equipment, and the driving frequently check the lubrication of each movement point, and lubricate the lubricating points regularly.

What parts of the crane need lubrication?

1) The roll of the bridge machine

2) Gear coupling

3) Gear reducer

4) Gteel wire rope

5) Hinge points on the brake

What matters need to pay attention to the crane lubrication?

1) keep the oil (fat) clean;

2) no mixing of lubricating oil (grease) of different brand names;

3) use suitable lubricating oil (grease) to lubricate according to the time of regulation;

4) add the grease to the pressure liposuction method (oil gun live oil pump, swirl type oil cup), so that the grease can be pushed to the friction surface to prevent the friction surface of the hand when rubbing.

5) it is not recommended to use sodium base grease in moist areas because of its strong hydrophilicity and easy failure;

6) no rotation of oil filling points should be used to reduce friction and prevent corrosion by using thin oil jugs in various rotation gaps.

Since the working environment of the port crane is relatively wet, the corrosion is also large, so the machine should be lubricated by the above requirements.

In addition, regular inspection and maintenance of equipment is essential, and we must pay attention to it.