Suspension Controlled Explosion Proof Electric Hoist
Overview The CD1, MD1 wire rope electric hoist is a light and small lifting device, which can be installed on single beam, bridge crane, gantry crane and cantilever crane. With slight modification, it can be used as a roll. Therefore, it is one of the most commonly used lifting equipment in...
The CD1, MD1 wire rope electric hoist is a light and small lifting device, which can be installed on single beam, bridge crane, gantry crane and cantilever crane.
With slight modification, it can be used as a roll.
Therefore, it is one of the most commonly used lifting equipment in factories, mines, ports, warehouses, warehouses and stores, which is necessary for improving labor efficiency and improving working conditions.
The lifting speed of CD1 electric hoist is constant speed, which can meet the general use requirement.
The MD1 electric hoist has two lifting speeds - constant and slow.
When working slowly, it can meet the requirements of precision loading and unloading, sand box mould, machine repair and other fine work.
Therefore, the suitable range of MD1 electric hoist is wider than that of CD1 electric hoist.
Main Structures
Reducer, hoist motor, running motor, broken firearm, cable slip line, reel device, hook device, coupling, soft cable current introducer, etc.
Gear reducer: the gear shaft is made of high quality cast iron, the box cover is made of high quality cast iron and is well sealed and sealed.
The reducer is a self-contained unit that is extremely convenient to load and unload.
Control box: the device that can cut off the main circuit in an emergency and has the upper and lower stroke to protect the fire limiter.
Ensure the safe operation of electric hoist.
Long life of electrical components, reliable use.
Wire rope: gb1102-74 (6*37+1)X type hoisting wire rope is used to ensure durability.
Conic motor: the hoist motor adopts the larger starting torque conical rotor brake asynchronous motor without the need of the external brake.
The motor load sustained rate is 25%, the motor adopts grade B or F insulation, and the motor protection grade IP44/IP54.
Product Parameters
Model
HB, BCD, BMD
Lifting capacity(t)
0.5
1
2
3
5
10
16
20
Lifting height(m)
6/9/12/18/24/30 or specified height
Lifting speed(m/min)
8 (0.8/8)
7 (0.7/7)
3.5 (0.35/3.5)
Traveling speed(m/min)
20
Power Source
3PAC 380v,50HZ
Application
Explosion proof electric hoist is widely used in petroleum, petrochemical, petrol stations, oil depots, gas production, chemical industry, military, electric power, mining, electronics, railways, and other dangerous environments where fires and explosions occur.
Hot Tags: suspension controlled explosion proof electric hoist, China, factory, manufacturers, suppliers, made in China