Cab Control High Temperature Working Steel Melting Plant Cranes

Cab Control High Temperature Working Steel Melting Plant Cranes

Brief introduction of Cab Control High Temperature Working Steel Melting Plant Cranes

QDY bridge foundry crane with hook is mainly used at the place where the molten metal is lifted.The working class of the comlete machine is A7, and thermal-protective coating is added at the bottom of the main girder. The assembling and test of the crane conform to the document NO. ZJBT[2007]375 which was issued by General Administration of Quality Supervision,Inspection and Quarantine of the People's Republic of China.The place where molten monmetal material and red-hot solid metal is lifted also can refer to this document.(note:HO in the below figure is the increased height of buffer of the crane.H0 is not more than 250).
Environmental conditions:

1.The power of crane is three-phase AC:rated frequency is 50HZ: rated voltage is 380V:
2.The temperazture of working environment is-10DC to 60DC.
3.The relative humidity is not more than 50% when the temperature is 40DC:
4.If the reqirements are more than mentioned above, it shall carry out the requirements in the purchase contract as the user asks.

Ordering instructions:

The basic parameters(rated lifting weight, lifting height and span,etc.)of the crane shall be described clearly when the user orders goods or signs a contract so that the product which may satisfy the working condition can be supplied.

Hot Tags: cab control high temperature working steel melting plant cranes, China, factory, manufacturers, suppliers, made in China